chemical1
products
backtop
backtop
ECS-2500
Introducing ECS-2500, ECSP's latest odor neutralizer for vapor phase odor abatement.

A broad-spectrum odor neutralizer, ECS-2500 controls a wide range of nuisance odor gases. Tests show that ECS-2500 does not merely mask odors, but reduces gas count within the atmosphere for many common nuisance odor gases. These include: hydrogen sulfide, sulfur dioxide and ammonia.

When combined with a specially designed ECSP dispersal system, ECS-2500 effectively controls odors in ducted and enclosed areas as well as in open-air applications. It can also serve as a primary scrubbing agent within nuisance odor abatement systems.

Vaporized into the atmosphere in areas where it will contact the malodorous gas, ECS-2500 attracts and accumulates the malodors through Van Der Waals forces. The active ingredients chemically react with the malodor to reduce the volatility and presence of odor-causing gases within the atmosphere.

ECS-2500 can be heavily diluted. Dilution rates vary in accordance with the type of malodors in the atmosphere; gas ppm level and solubility; and the number and placement of the nozzles used to disperse the neutralizer.

Selecting the right location and dispersion apparatus maximizes the effect. Your ECSP representative will be happy to discuss your requirements and arrange an on-site demonstration. When the demonstration is complete, ECSP will recommend the appropriate dispersion equipment for your facility. ECSP can design and build the system, supervise its installation and provide ongoing service to ensure optimum performance.

smallogo
leafbttn1
Equipment
leafbttn1
ECS Muni
leafbttn1
ECS Entats
Foundry
Municipal Wastewater
Foundry
Petrochemical Plant
Material Safety Information
graphart
Conforms to the following:
  • OECD Guideline 401 - Acute Oral Toxicity
  • OECD Guideline 402 - Acute Dermal Toxicity
  • OECD Guideline 403 - Acute Inhalation Toxicity
  • OECD Guideline 404 -  Primary Skin Irritation
  • OECD Guideline 405 - Eye Irritation
  • OECD Guideline 406 - Dermal Sensitization
EPA Guideline 600/4-90/02F - Marine Toxicity
All constituents are not considered hazardous according to the Federal Hazard Communication Standard (29 CFR 1910.1200)
Fire & Explosion Hazard Data:
  • Flash Point (method used): >210oF
  • Flammable Limits - LEL:N/A  UEL: N/A
  • Extinguishing Media: Does not burn
  • Special Fire Fighting Procedures: None
  • Unusual Fire and Explosive Hazards: None
Reactivity Data:
  • Stability: Stable
  • Incompatibility (materials to avoid): Strong oxidizing agents
  • Hazardous Decomposition or By-Products: None
  • Hazardous Polymerization: Will not occur
Health Hazard Data:
  • Route(s) of Entry: Inhalation? Yes; Eyes? Yes; Ingestion? Yes
  • Health Hazards (acute & chronic): Eye contact may cause mild irritation. Wash 15 minutes with water.
  • Carcinogenicity: NTP? No; IARC Monographs? No
  • OSHA Regulated: No
  • Signs & Simptoms of Exposure: None
  • Medical Conditions Generally Aggravated by Exposure: None known
  • Emergency and First Aid Procedures: Eyes - Wash with water for 15 minutes; Ingestion - Drink several glasses of water. See physician if symptoms persist.
Physical Data:
  • pH: 7.0
  • Boiling Point: 209oF
  • Melting Point: N/A
  • Specific Gravity @ 60oF: 0.9999
  • Vapor Density @ 60oF: 0.9989
  • Evaporation Rate (Butyl Acetate =1): 3:1
  • Solubility in Water: Soluble
  • Percent Volatile: 17.12 wt % @ 150oF for 2 hours
  • Appearance/Odor: Milky white emulsion, eucalyptus/pine scent
Control Measures:
  • Respiratory Protection (specify type): None required
  • Ventilation: Use with adequate ventilation
  • Eye protection: None required
  • Gloves/other Protective Clothing or Equipment: None required
  • Work/Hygenic Practices: Wash thoroughly with soap & water after handling
Precautions:
  • Steps to be taken if material is released or spilled: Flush to drain with large quantities of water.
  • Waste Disposal Method: Dispose of liquid waste in accordance with federal, state & local regulations.
  • Precautions in handling/storing: Avoid freezing. Material may layer with freeze & thaw conditions.
  • Other Precautions: Wash thoroughly with soap & water after handling.

 
Home Industries Products Services Contact us